快乐飞艇手机软件

1-3/8 in. Dia. gravity roller conveyor is used to carry lightweight packages. This light duty conveyor easily flows product with minimal slope, and is useful when portability is required.

Download PDF

ROLLER SURFACE: Standard galvanized tube. Optional roll covers includes Orange Polyurethane, 1/8″ wall.

COUPLINGS: 3/8” diameter rod on one end, mating hooks on opposite end. Optional coupling is strap, butt coupler, or no couplings.

FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.

1.9″ Diameter 16 ga. Gravity Roller Conveyors are ideal for applications that require an economical, non-powered means for conveying material. This medium duty conveyor easily flows product with minimal slope and is used to convey a wide array of products and packages.

Download PDF

1.9″ Diameter 12 ga. Gravity Roller Conveyors are ideal for applications that require an economical, non-powered means for conveying material. The 1912 roller in this conveyor is a sturdy roller that is a step up in robustness compared to a 1916 roller.

Download PDF

BETWEEN FRAMES: 6″ – 51″
LENGTH: 18″ – 120″
ROLLER CENTERS: 2.25″, 3″, 4.5″, 6″, 9″, 12″
ROLLERS: 1909 Roller – 9ga wall tube. 1912 Roller – 12ga wall tube. 1916 Roller –16ga wall tube. All rollers 1.9″ dia., with 7/16″ hex cold rolled steel axles, spring retained. Standard bearings are light oil lubricated. Optional bearings include combinations of precision, semi-precision, and non-precision construction with light oil or grease packed lubrication.
FRAMES: Standard F97 set high 3-1/2″ x 1-1/2″ x 12ga formed steel channel with bolted 2″ x 8ga galvanized angle crossties.
ROLL COVERS: Optional Orange Polyurethane, 1/8″ wall or galvanized tube for 1912, 1916.
COUPLINGS: Bolted butt couplers standard on both ends of channel.
FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.

1.9″ Diameter 9 ga. Gravity Roller Conveyors are ideal for applications that require an economical, non-powered means for conveying material. The 1909 roller in this conveyor has a heavier wall thickness and is suitable for moderately heavier applications than it’s 1912 cousin.

Download PDF

BETWEEN FRAMES: 6″ – 51″ LENGTH: 18″ – 120″ ROLLER CENTERS: 2.25″, 3″, 4.5″, 6″, 9″, 12″
ROLLERS: 1909 Roller – 9ga wall tube. 1912 Roller – 12ga wall tube. 1916 Roller –16ga wall tube. All rollers 1.9″ dia., with 7/16″ hex cold rolled steel axles, spring retained. Standard bearings are light oil lubricated. Optional bearings include combinations of precision, semi-precision, and non-precision construction with light oil or grease packed lubrication.
FRAMES: Standard F97 set high 3-1/2″ x 1-1/2″ x 12ga formed steel channel with bolted 2″ x 8ga galvanized angle crossties.
ROLL COVERS: Optional Orange Polyurethane, 1/8″ wall or galvanized tube for 1912, 1916.
COUPLINGS: Bolted butt couplers standard on both ends of channel.
FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.

2.5″ O.D. x 14 ga. Gravity Roller Conveyors are ideal for applications that require an economical, non-powered means for conveying material. This conveyor is used for handling medium weight pallets, drums, and containers.

Download PDF

BETWEEN FRAMES: 6″ – 51″
LENGTH: 18″ – 120″
ROLLER CENTERS: 3″, 4.5″, 6″, 9″, 12″
ROLLERS: 2.5″ dia., 14ga wall tubes with 7/16″ hex cold rolled steel axles, spring retained. Standard A40 bearings are light oil lubricated. Optional A41 bearings are greased. 290 lbs roller capacity.
FRAMES: Standard F97 set high 3-1/2″ x 1-1/2″ x 12ga formed steel channel with bolted 2″ x 8ga galvanized angle crossties.
ROLLER SURFACE: Optional Orange Polyurethane, 1/8″ wall.
COUPLINGS: Bolted butt couplers Standard on both ends of channel.
FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.

2.5″ Diameter 11 ga. Gravity Roller Conveyors are ideal for applications that require an economical, non-powered means for conveying material. This heavy duty conveyor is used for handling full pallets, drums, and containers.

Download PDF

BETWEEN FRAMES: 6″ – 61″
LENGTH: 18″ – 120″
ROLLER CENTERS: 3″, 4.5″, 6″, 9″, 12″
ROLLERS: 2511 Roller – 2.5″ dia., 11ga wall tubes. 2607 Roller – 2.625″ dia., 7ga wall tubes. Both rollers with 11/16″ hex cold rolled steel axle, spring retained. Standard A6204 bearings are light oil lubricated. Optional bearings include combinations of precision, semi-precision and non-precision construction with light oil or grease packed lubrication. 750 lbs roller capacity.
FRAMES: Standard F96 set high 4″ x 1-1/2″ x 8ga formed steel channel with bolted 2″ x 8ga galvanized angle crossties.
ROLL COVERS: Optional Orange Polyurethane, 1/8″ wall or galvanized tube.
COUPLINGS: Bolted butt couplers standard on both ends of channel.
FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.

2-5/8″ Diameter, 7 ga. Gravity Roller Conveyors are ideal for applications that require an economical, non-powered means for conveying material. This heavy duty conveyor is used for handling full pallets, drums, and containers. The heavy wall rollers are an excellent choice for impact zones or fork truck load/unload stations.

Download PDF

BETWEEN FRAMES: 6″ – 61″
LENGTH: 18″ – 120″
ROLLER CENTERS: 3″, 4.5″, 6″, 9″, 12″
ROLLERS: 2511 Roller – 2.5″ dia., 11ga wall tubes. 2607 Roller – 2.625″ dia., 7ga wall tubes. Both rollers with 11/16″ hex cold rolled steel axle, spring retained. Standard A6204 bearings are light oil lubricated. Optional bearings include combinations of precision, semi-precision and non-precision construction with light oil or grease packed lubrication. 750 lbs roller capacity.
FRAMES: Standard F96 set high 4″ x 1-1/2″ x 8ga formed steel channel with bolted 2″ x 8ga galvanized angle crossties.
ROLL COVERS: Optional Orange Polyurethane, 1/8″ wall or galvanized tube.
COUPLINGS: Bolted butt couplers standard on both ends of channel.
FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.

3.5″ Diameter, 9 ga. Gravity Roller Conveyors are ideal for applications that require an economical, non-powered means for conveying material. This heavy duty conveyor is used for handling full pallets, drums, and containers.

Download PDF

BETWEEN FRAMES: 12″ – 61″
LENGTH: 18″ – 120″
ROLLER CENTERS: 4″, 6″, 8″, 12″
ROLLERS: 3.5″ dia., 9ga wall tubes with 11/16″ hex cold rolled steel axles, spring retained. Standard A70 bearings are grease lubricated. 750 lbs roller capacity.
FRAMES: Standard F94 set high 4@5.4# structural steel channel with welded 2″ x 4ga angle crossties.
ROLLER SURFACE: Optional Orange Polyurethane, 1/8” wall.
COUPLINGS: Welded 1/4″ plate butt couplers standard on both ends of channel.
FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.

3.5″ Diameter, .300 Wall Gravity Roller Conveyors are ideal for applications that require an economical, non-powered means for conveying material. This heavy duty conveyor is used for handling full pallets, drums, and containers. The 3-1/2″ o.d. x .300 wall, high capacity rollers, and standard structural channel frames, are suitable for heavy loads, and the most abusive industrial applications around.

Download PDF

BETWEEN FRAMES: 6″ – 90″
LENGTH: 18″ – 120″
ROLLER CENTERS: 4″, 6″, 8″, 12″, 24″
ROLLERS: 3.5″ dia., .300″ wall tubes with 1″ hex cold rolled steel axles, cotter pin retained. Standard A80 bearings are grease lubricated. Double Shielded. 2000 lbs roller capacity.
FRAMES: Standard F95 set high 5@6.7# structural steel channel with welded 2″ x 1/4″ angle crossties.
ROLLER SURFACE: Optional Orange Polyurethane, 1/8” wall.
COUPLINGS: Welded 1/4″ plate butt couplers standard on both ends of channel.
FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow

1-3/8 in. Dia. gravity roller Curves are used to provide smooth product flow on light weight packages through turns. Curves will convey products with minimum degree of pitch based on weight and size. Optional guard rails may be added for product protection.

Download PDF

BETWEEN FRAMES: 10″, 13″, 16″, 22″
DEGREE: 90 , 45 , 30
ROLLERS: 1.375″ dia., 18ga wall galvanized tubes with 1/4″ round cold rolled steel axles, spring retained. Standard A02 bearings are light oil lubricated. 50 lbs roller capacity.
FRAMES: Standard FC98 set high 2-1/2″ x 1″ x 12ga formed steel channel with bolted 1-1/8″ x 1/8″ angle crossties. Optional FC33 set low 3-1/2″ x 1″ x 12ga.
ROLLER SURFACE: Standard galvanized tube. Optional roll covers includes Orange Polyurethane, 1/8″ wall.
COUPLINGS: 3/8″ diameter rod on one end, mating hooks on opposite end. Optional coupling is strap, butt coupler, or no coupling.
FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.

1.9″ Diameter 16 ga. Gravity Roller Curves are used to provide smooth product flow through turns. Curves will convey products with minimum degree of pitch based on weight and size. Optional guard rails may be added for product protection.

Download PDF

BETWEEN FRAMES: 6″ – 51″
DEGREE: 90 , 45 , 30
ROLLERS: 1909 Roller – 9ga wall tube. 1912 Roller – 12ga wall tube. 1916 Roller –16ga wall tube. All rollers 1.9″ dia., with 7/16″ hex cold rolled steel axles, spring retained. Standard bearings are light oil lubricated. Optional bearings include combinations of precision, semi-precision, and non-precision construction with light oil or grease packed lubrication.
FRAMES: Standard FC97 set high 3-1/2″ x 1-1/2″ x 12ga formed steel channel with bolted 2″ x 8ga galvanized angle crossties. Optional frame include FC38 channel, 4-1/2” x 1-1/2” x 12ga set low.
ROLLER SURFACE: Optional Orange Polyurethane, 1/8″ wall or galvanized tube.
COUPLINGS: Bolted butt couplers standard on both ends of channel.
FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.

1.9″ Diameter 12 ga. Gravity Roller Curves are used to provide smooth product flow through turns. Curves will convey products with minimum degree of pitch based on weight and size. Optional guard rails may be added for product protection. The 1912 roller in this conveyor is a sturdy roller that is a step up in robustness compared to a 1916 roller.

Download PDF

BETWEEN FRAMES: 6″ – 51″
DEGREE: 90 , 45 , 30
ROLLERS: 1909 Roller – 9ga wall tube. 1912 Roller – 12ga wall tube. 1916 Roller –16ga wall tube. All rollers 1.9″ dia., with 7/16″ hex cold rolled steel axles, spring retained. Standard bearings are light oil lubricated. Optional bearings include combinations of precision, semi-precision, and non-precision construction with light oil or grease packed lubrication.
FRAMES: Standard FC97 set high 3-1/2″ x 1-1/2″ x 12ga formed steel channel with bolted 2″ x 8ga galvanized angle crossties. Optional frame include FC38 channel, 4-1/2” x 1-1/2” x 12ga set low.
ROLLER SURFACE: Optional Orange Polyurethane, 1/8″ wall or galvanized tube.
COUPLINGS: Bolted butt couplers standard on both ends of channel.
FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.

1.9″ Diameter 9 ga. Gravity Roller Curves are used to provide smooth product flow through turns. Curves will convey products with minimum degree of pitch based on weight and size. Optional guard rails may be added for product protection. The 1909 roller in this conveyor has a heavier wall thickness and is suitable for moderately heavier applications than its 1912 cousin.

Download PDF

BETWEEN FRAMES: 6″ – 51″
DEGREE: 90 , 45 , 30
ROLLERS: 1909 Roller – 9ga wall tube. 1912 Roller – 12ga wall tube. 1916 Roller –16ga wall tube. All rollers 1.9″ dia., with 7/16″ hex cold rolled steel axles, spring retained. Standard bearings are light oil lubricated. Optional bearings include combinations of precision, semi-precision, and non-precision construction with light oil or grease packed lubrication.
FRAMES: Standard FC97 set high 3-1/2″ x 1-1/2″ x 12ga formed steel channel with bolted 2″ x 8ga galvanized angle crossties. Optional frame include FC38 channel, 4-1/2” x 1-1/2” x 12ga set low.
ROLLER SURFACE: Optional Orange Polyurethane, 1/8″ wall or galvanized tube.
COUPLINGS: Bolted butt couplers standard on both ends of channel.
FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.

2.5″ O.D. x 14 ga. Gravity Roller Curves are used to provide smooth product flow through turns. Curves will convey products with minimum degree of pitch based on weight and size. Optional guard rails may be added for product protection.

Download PDF

BETWEEN FRAMES: 6″ – 51″
DEGREE: 90 , 45 , 30
ROLLERS: 2.5″ dia., 14ga wall tubes with 7/16″ hex cold rolled steel axle, spring retained. Standard A40 bearings are light oil lubricated. Optional A41 bearings are greased. 290 lbs roller capacity.
FRAMES: Standard FC97 set high 3-1/2″ x 1-1/2″ x 12ga formed steel channel with bolted 2″ x 8ga galvanized angle crossties. Optional frame include FC38 channel, 4-1/2″ x 1-1/2″ x 12ga set low.
ROLLER SURFACE: Optional Orange Polyurethane, 1/8″ wall.
COUPLINGS: Bolted butt couplers Standard on both ends of channel.
FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.

2.5″ Diameter 11 ga. Gravity Roller Curves are used to provide smooth product flow through turns. Curves will convey products with minimum degree of pitch based on weight and size. Optional guard rails may be added for product protection.

Download PDF

BETWEEN FRAMES: 6″ – 61″
DEGREE: 90 , 45 , 30
ROLLERS: 2511 Roller – 2.5″ dia., 11ga wall tubes. 2607 Roller – 2.625″ dia., 7ga wall tubes. Both rollers have 11/16″ hex cold rolled steel axle, spring retained. Standard A50 bearings are light oil lubricated. Optional bearings include combinations of precision, semi-precision and non-precision construction with light oil or grease packed lubrication. 750 lbs roller capacity.
FRAMES: Standard FC96 set high 4″ x 1-1/2″ x 8ga formed steel channel with bolted 2″ x 8ga galvanized angle crossties. Optional frames include FC19 channel 5″ & 4″ x 1-1/2″ x 8ga set high and low or FC39 channel 5” x 1-1/2” x 8ga set low.
ROLLER SURFACE: Optional Orange Polyurethane, 1/8″ wall or galvanized tube. (2511 ONLY)
COUPLINGS: Bolted butt couplers standard on both ends of channel.
FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.

2.5″ Diameter 11 ga. Gravity Roller Curves are used to provide smooth product flow through turns. Curves will convey products with minimum degree of pitch based on weight and size. Optional guard rails may be added for product protection.

Download PDF

BETWEEN FRAMES: 6″ – 61″
DEGREE: 90, 45, 30
ROLLERS: 2511 Roller – 2.5″ dia., 11ga wall tubes. 2607 Roller – 2.625″ dia., 7ga wall tubes. Both rollers have 11/16″ hex cold rolled steel axle, spring retained. Standard A50 bearings are light oil lubricated. Optional bearings include combinations of precision, semi-precision and non-precision construction with light oil or grease packed lubrication. 750 lbs roller capacity.
FRAMES: Standard FC96 set high 4″ x 1-1/2″ x 8ga formed steel channel with bolted 2″ x 8ga galvanized angle crossties. Optional frames include FC19 channel 5″ & 4″ x 1-1/2″ x 8ga set high and low or FC39 channel 5” x 1-1/2” x 8ga set low.
ROLLER SURFACE: Optional Orange Polyurethane, 1/8″ wall or galvanized tube. (2511 ONLY)
COUPLINGS: Bolted butt couplers standard on both ends of channel.
FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.

2-5/8″ Diameter, 7 ga. Gravity Roller curves provide smooth product flow with a minimum angle of pitch based on weight and size. Optional guard rails may be added for product protection. The 25TRC is provided with tapered rollers to maintain product orientation, and is commonly used with 1912, 1916, and 2514 gravity roller conveyors.

Download PDF

BETWEEN FRAMES: 13″ – 39″
DEGREE: 90 , 45 , 30
ROLLERS: 2.500″ & 1.687″ dia., 14ga wall tapered tube with 7/16″ hex cold rolled steel axles.
FRAMES: Standard FC42 Set high 3-1/2″x1-1/2″x12 ga, formed steel channel with bolted 2″ x 8ga galvanized angle crossties.
ROLLER SURFACE: Optional galvanized tube.
COUPLINGS: Bolted butt couplers Standard on both ends of channel.
FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.

1-3/8 in. Dia. Gravity Roller Spurs are used to divert off, or merge on, main trunk line conveyors at various angles. They are often used when several lines transfer onto a main conveyor line, from work stations or similar applications.

Download PDF

BETWEEN FRAMES: 10″ – 22″ (See chart)
LENGTH: 24″ – 57″ (See chart)
ROLLER CENTERS: 1.5″, 3″, 4.5″, 6″
DEGREE: 30 , 45 (See chart)
ROLLERS: 1.375″ dia., 18 ga. wall galvanized tubes with 1/4″ round cold rolled steel axles, spring retained. Standard A02 bearings are light oil lubricated. 50 lbs. roller capacity.
FRAMES: Standard F98 set high 2-1/2″ x 1″ x 12ga formed steel channel with bolted 1-1/8″ x 12ga angle crossties. Optional F33 set low 3-1/2″ x 1″ x 12ga.
ROLLER SURFACE: Standard galvanized tube. Optional roll covers includes Orange Polyurethane, 1/8″ wall.
COUPLINGS: Standard Hooks on one end.
FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.

1-3/8 in. Dia. Gravity Roller Spurs are used to divert off, or merge on, main trunk line conveyors at various angles. They are often used when several lines transfer onto a main conveyor line, from work stations or similar applications.

Download PDF

BETWEEN FRAMES: 10″ – 22″ (See chart)
LENGTH: 24″ – 57″ (See chart)
ROLLER CENTERS: 1.5″, 3″, 4.5″, 6″
DEGREE: 30 , 45 (See chart)
ROLLERS: 1.375″ dia., 18 ga. wall galvanized tubes with 1/4″ round cold rolled steel axles, spring retained. Standard A02 bearings are light oil lubricated. 50 lbs. roller capacity.
FRAMES: Standard F98 set high 2-1/2″ x 1″ x 12ga formed steel channel with bolted 1-1/8″ x 12ga angle crossties. Optional F33 set low 3-1/2″ x 1″ x 12ga.
ROLLER SURFACE: Standard galvanized tube. Optional roll covers includes Orange Polyurethane, 1/8″ wall.
COUPLINGS: Standard Hooks on one end.
FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.

1.9″ Diameter 16 ga. Gravity Roller Spurs are used to divert off, or merge on, main trunk line conveyors at various angles. They are often used when several lines transfer onto a main conveyor line, from work stations or similar applications.

Download PDF

BETWEEN FRAMES: 13″ – 51″ (See chart)
LENGTH: 28″ – 106″ (See chart)
ROLLER CENTERS: 3″, 4.5″, 6″
DEGREE: 30 , 45 (See chart)
ROLLERS: 1.9″ dia., 16ga wall tubes with 7/16″ hex cold rolled steel axles, spring retained. Standard bearings are light oil lubricated. Optional bearings include combinations of precision, semi precision, and non-precision construction with light oil or grease packed lubrication.
FRAMES: Standard F97 set high 3-1/2″ x 1″ x 12ga formed steel channel with bolted 2″ x 8ga galvanized angle crossties. Optional F38 set low 4-1/2″ x 1-1/2″ x 12ga.
ROLLER SURFACE: Optional Orange Polyurethane, 1/8″ wall or galvanized tube.
COUPLINGS: Bolted butt couplers standard on one end of channel.
FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.

1.9″ Diameter 16 ga. Gravity Roller Spurs are used to divert off, or merge on, main trunk line conveyors at various angles. They are often used when several lines transfer onto a main conveyor line, from work stations or similar applications.

Download PDF

BETWEEN FRAMES: 13″ – 51″ (See chart)
LENGTH: 28″ – 106″ (See chart)
ROLLER CENTERS: 3″, 4.5″, 6″
DEGREE: 30 , 45 (See chart)
ROLLERS: 1.9″ dia., 16ga wall tubes with 7/16″ hex cold rolled steel axles, spring retained. Standard bearings are light oil lubricated. Optional bearings include combinations of precision, semi precision, and non-precision construction with light oil or grease packed lubrication.
FRAMES: Standard F97 set high 3-1/2″ x 1″ x 12ga formed steel channel with bolted 2″ x 8ga galvanized angle crossties. Optional F38 set low 4-1/2″ x 1-1/2″ x 12ga.
ROLLER SURFACE: Optional Orange Polyurethane, 1/8″ wall or galvanized tube.
COUPLINGS: Bolted butt couplers standard on one end of channel.
FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.